aws-cfm-utils

1.9.0 • Public • Published

AWS CLOUDFORMATION UTILS

NPM module to create and/or update cloudformation stacks

Coverage Status Build Status Known Vulnerabilities npm version node dependencies Status devDependencies Status npm weekly FOSSA Status

Table of Contents

Purpose of aws-cfm-utils cli

Deployment of Cloudformation stacks/templates through an automated pipeline requires you to face a challenge of creating a CloudFormation stack on the first run and later only update it in the following pipeline runs. AWS CLI will not let you do it with a single command! Additionally, stack status not reported at any point when you try to create-stack or update-stack using AWS CLI. aws-cfm-utils cli resolves all those limitations.

aws-cfm-utils creates or updates a CloudFormation stack without additional commands being used. If no updates are to be performed, no error is thrown. aws-cfm-utils behaves exactly as the AWS CLI regarding input values, output will be different. Also, improved handling of stack-status reporting during the deployment process is available.

Installation

npm install -g aws-cfm-utils

Usage

Usage: aws-cfm-utils [options]

Help: aws-cfm-utils --help

Version: aws-cfm-utils --version

CLI Options

  Options:
    --stack-name                                                                         [string] [required]
    --template-body                                                                                 [string]
    --stack-policy-body                                                                             [string]
    --accesskeyid                                                                                   [string]
    --secretkey                                                                                     [string]
    --sessiontoken                                                                                  [string]
    --parameters                                                                                     [array]
    --tags                                                                                           [array]
    --region                                                                 [string] [default: "eu-west-1"]
    --capabilities     [array] [choices: "CAPABILITY_NAMED_IAM", "CAPABILITY_IAM", "CAPABILITY_AUTO_EXPAND"]
    --profile                                                                                       [string]
    --role-arn                                                                                      [string]
    --resource-types                                                                                 [array]
    --disable-rollback                                                                             [boolean]
    --template-url                                                                                  [string]
    --stack-policy-url                                                                              [string]
    --notification-arns                                                                              [array]
    --timeout-in-minutes                                                                            [number]
    --on-failure                                      [string] [choices: "DO_NOTHING", "ROLLBACK", "DELETE"]
    --use-previous-template                                                                        [boolean]
    --stack-policy-during-update-body                                                               [string]
    --stack-policy-during-update-url                                                                [string]
    --enable-termination-protection                                                                [boolean]
    --suspend-scheduled-actions                                                    [boolean] [default: true]
    --stack-events                                                                                 [boolean]
    --refresh-rate                                                                    [number] [default: 15]
    -v, --version                                                Show version number               [boolean]
    -h, --help                                                   Show help                         [boolean]

CLI Examples

1. aws-cfm-utils --stack-name stackname --template-body cfmtemplate --stack-policy-body stackpolicy --region eu-west-1 --enable-termination-protection true --refresh-rate 30

2. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --enable-termination-protection true --region eu-west-1 --parameters file://test/fixtures/parameters.json --tags Key=TestTag,Value=TestTagValue Key=TestTag2,Value=TestTagValue2 Key=TestTag3,Value=TestTagValue4

3. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --enable-termination-protection true --region eu-west-1 --parameters file://test/fixtures/parameters.json --tags file://test/fixtures/tags.json

4. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --enable-termination-protection --region eu-west-1 --parameters ParameterKey=TestName,ParameterValue=TestKey ParameterKey=TestName2,ParameterValue=TestKey2

// More complicated ParameterValues in the following two examples, ensure to escape double quotes
5. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --enable-termination-protection --parameters ParameterKey=TestName,ParameterValue=\"subnet1,subnet2,subnet3\" ParameterKey=TestName2,ParameterValue=TestKey2

6. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --no-enable-termination-protection --parameters ParameterKey=vpc,ParameterValue=\"vpcid=12345,vpceid=12345\" ParameterKey=TestName2,ParameterValue=TestKey2

// More complicated TagValue in the following two examples, ensure to escape double quotes
7. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --enable-termination-protection --parameters ParameterKey=TestName,ParameterValue=\"subnet1,subnet2,subnet3\" ParameterKey=TestName2,ParameterValue=TestKey2 --tags Key=TestTag,Value=TestTagValue Key=s3buckets,Value=\"s3://bucket_name1/....,s3://bucket_name2/....\"

8. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --no-enable-termination-protection --parameters ParameterKey=vpc,ParameterValue=\"vpcid=12345,vpceid=12345\" ParameterKey=TestName2,ParameterValue=TestKey2 --tags Key=s3bucket,Value=\"S3link=s3://bucket_name/....,S3name=bucket_name\"

// Using AccessKeyID and SecretKey credentials
9. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --no-enable-termination-protection --parameters file://test/fixtures/parameters.json --tags file://test/fixtures/tags.json  --accesskeyid A12389sasfas123A --secretkey /+-sadasd213123,123asdPOhrP9+4xW8z7v3h --stack-events

// Using profile from your aws config
10. aws-cfm-utils --stack-name mynewstack --template-body file://test/fixtures/template.json --stack-policy-body file://test/fixtures/stackpolicy.json --no-enable-termination-protection --parameters file://test/fixtures/parameters.json --tags file://test/fixtures/tags.json  --profile yourprofilname --stack-events

In general, please use /"your_values/" for --parameters or --tags to ensure your values include all the special characters.

Read from file support

The following CLI options support read file from disk:

--tempate-body --stack-policy-body --parameters --tags

Simply use the file://{DIR_FILENME}. See section above for examples.

Parameter Options

Global parameters (AWS CLI Docs):

--accesskeyid
--secretkey
--profile
--region // defaults to Ireland region eu-west-1

Note: you can either specify profile value or accesskeyid && secretkey. Otherwise error is returned. More about credential in Credential settings section.

Used during creation of the stack, otherwise ignored (create-stack):

--enable-termination-protection | --no-enable-termination-protection
--disable-rollback | --no-disable-rollback
--timeout-in-minutes
--on-failure

Used during update of the stack, otherwise ignored (update-stack):

--use-previous-template | --no-use-previous-template
--stack-policy-during-update-body
--stack-policy-during-update-url

Addional Custom options for update-stack, create-stack and delete-stack:

In order to see all the CloudFormation Stack Events happening during update/create process. Use the following option;

--stack-events // if not specified only stack status is shown

Example log output when --stack-events is specified. It is very similar to what we see in the AWS Console:

Stack Events for stack: mynewstack
-----------------------------------------------------------------------------------------------------------------------------
TimeStamp                                ResourceStatus      Type                        LogicalID             Reason
---------------------------------------  ------------------  --------------------------  --------------------  --------------
Sun May 13 2018 03:51:17 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::NetworkAcl        PrivateNetworkAcl
Sun May 13 2018 03:51:17 GMT+0100 (BST)  UPDATE_IN_PROGRESS  AWS::EC2::NetworkAcl        PrivateNetworkAcl
Sun May 13 2018 03:51:16 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::Subnet            PublicSubnet1
Sun May 13 2018 03:51:16 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::Subnet            PublicSubnet2
Sun May 13 2018 03:51:16 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::Subnet            PrivateSubnet2
Sun May 13 2018 03:51:15 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::RouteTable        PrivateRouteTable1
Sun May 13 2018 03:51:15 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::Subnet            PrivateSubnet1
Sun May 13 2018 03:51:15 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::RouteTable        PublicRouteTable
Sun May 13 2018 03:51:15 GMT+0100 (BST)  UPDATE_COMPLETE     AWS::EC2::RouteTable        PrivateRouteTable2
...

To customise CLI's refresh rate of logging use;

--refresh-rate // takes value in seconds, it is optional and default value is 15 seconds

CLI's Environment variables

CLI handles the following optional variables;

AWS_REGION or AWS_DEFAULT_REGION
HTTPS_PROXY
AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY and/or AWS_SESSION_TOKEN

CLI supports easy deployments from local or CI environments and uses .env if available.

Create a .env file in the root directory of your project. Add environment-specific variables on new lines in the form of NAME=VALUE. For example:

AWS_PROFILE=test
AWS_REGION=eu-west-1

Multi-Factor Authentication enabled for profile

In case you are using temporary credentials by assuming a role you will likely want to use it with a mfa_serial property, then multi-factor authentication is required. You will be prompt for input of the MFA token.

$ aws-cfm-utils --profile role-name --stack-name myteststack --template-body file://teststack.json
? Enter MFA token for arn:aws:iam::00000000000:mfa/marcincuber@hotmail.com: ()
{}

To make use of assume role you can use the following configuration;

# ~/.aws/credentials file
[dev-role]
aws_access_key_id = asdasdasdasdasdasdasda
aws_secret_access_key = asdasdasdasdasdasdasda

[dev-role-assume-role]
role_arn = arn:aws:iam::0000000000:role/switch-role-test
source_profile = dev-role
mfa_serial = arn:aws:iam::0000000000:mfa/marcincuber@hotmail.com

# ~/.aws/config file
[profile dev-role]
region=eu-west-1
output=json

[profile dev-role-assume-role]
region = eu-west-1

Credential settings, General order of execution

The AWS CLI looks for credentials and configuration settings in the following order:

  1. Command line options – region, output format and profile can be specified as command options to override default settings.
  2. Environment variables – AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and AWS_SESSION_TOKEN.
  3. The AWS credentials file – located at ~/.aws/credentials on Linux, macOS, or Unix, or at C:\Users\USERNAME .aws\credentials on Windows. This file can contain multiple named profiles in addition to a default profile.
  4. The CLI configuration file – typically located at ~/.aws/config on Linux, macOS, or Unix, or at C:\Users\USERNAME .aws\config on Windows. This file can contain a default profile, named profiles, and CLI specific configuration parameters for each.
  5. Container credentials – provided by Amazon Elastic Container Service on container instances when you assign a role to your task.
  6. Instance profile credentials – these credentials can be used on EC2 instances with an assigned instance role, and are delivered through the Amazon EC2 metadata service.

Tests etc.

Unit Tests

npm run test

Eslint

npm run lint

Node Modules security

We use tool called Snyk.io to scan node moduless. See Snyk.io

Code Coverage

Locally execute:

npm run coverage

Otherwise, Codecov is used to publish coverage results. See Codecov.

Codecov is uploading coverage tests to PRs directly compering it against master branch.

Build Server

Travis is used to build and test the npm module. See Travis.

Travis is currently building, testing and populating results of the tests. In the future it will be publishing NPM module on merge to master.

Software License Scanning

We use FOSSA system which helps us manage components. It is used to perform dynamic & static build analysis on code to help understand the open source components and stay compliant with software licenses. It is providing feedback on every PR so that we can say up-to-date with new issues, if any.

See FOSSA Portal

License Status

Requirements and Dependencies

  1. NODE version >= 8.10

Dependencies

  1. aws-sdk
  2. yargs
  3. console.table
  4. proxy-agent
  5. dotenv
  6. inquirer

See Dependencies Status

DevDependencies

  1. coveralls
  2. eslint
  3. eslint-config-standard
  4. eslint-plugin-import
  5. eslint-plugin-node
  6. eslint-plugin-promise
  7. eslint-plugin-standard
  8. istanbul
  9. mocha
  10. sinon

See DevDependencies Status

Troubleshoot

Commonly seen error is when stack-status is returning undifined. It means that your deployment credentials are incorrectly set or --profile, --accesskeyid, --secretkey were not passed.

Generating change log

[sudo] gem install github_changelog_generator # install gem
github_changelog_generator marcincuber/aws-cfm-utils # generate for this repo

Contact

If you have any questions, drop me an email marcincuber@hotmail.com or open an issue and leave stars! :)

License Status

FOSSA Status

Package Sidebar

Install

npm i aws-cfm-utils

Weekly Downloads

55

Version

1.9.0

License

MIT

Unpacked Size

112 kB

Total Files

34

Last publish

Collaborators

  • marcincuber