PowerArubaSW

This is a Powershell module for configure a ArubaOS Switch.

With this module (version 0.9.0) you can manage:

• System (Name, Location, Contact) & Switch Status (Product and Hardware info)
• Vlans (Add/Configure/Remove)
• Vlans Ports (Add/Configure/Remove a vlan (tagged/untagged/forbidden) to a interface)
• REST (Get API Version / Get|Set Rest Timeout)
• LLDP (Get|Set GlobalStatus, Get ports/neighbor stats, Get Remote)
• LACP (Add/Configure/Remove)
• Led Locator (Get|Set Led indicator)
• Ports (Information (name, status, config_mode...) and Statistics)
• DNS (Add/configure/remove IP Address and domain names)
• Trunk (Add/Configure/Remove)
• STP (Add/Configure/Remove GlobalConfig or Port)
• IP Address (Get)
• Cli (AnyCli and CliBatch for send CLI function)
• PoE (Get/Configure PoE Settings and Get Poe Stats)
• RADIUS Server (Add/Get/Set/Remove)
• RADIUS Group (Add/Get/Remove)
• RADIUS Profile (Get/Set)
• MAC Table (Get)
• Banner (Get/set)
• Ping (Test)
• Multi Connection

More functionality will be added later.

Connection can use HTTPS (default) or HTTP Tested with Aruba OS 2530, 2930F, 2930M, 3810, 54xxRzl (using 16.05.x firmware and later...) on Windows/Linux/macOS

Usage

All resource management functions are available with the Powershell verbs GET, ADD, SET, REMOVE. For example, you can manage Vlans with the following commands:

• Get-ArubaSWVlans
• Add-ArubaSWVlans
• Set-ArubaSWVlans
• Remove-ArubaSWVlans

Requirements

• Powershell 5 or 6 (Core) (If possible get the latest version)
• An Aruba OS Switch (with firmware 16.x), REST API enable and HTTPS enable (recommended)

Instructions

Install the module

# Automated installation (Powershell 5 or later):
    Install-Module PowerArubaSW

# Import the module
    Import-Module PowerArubaSW

# Get commands in the module
    Get-Command -Module PowerArubaSW

# Get help
    Get-Help Get-ArubaSWVlans -Full

Examples

Connecting to the Aruba Switch

The first thing to do is to connect to a Aruba Switch with the command Connect-ArubaSW :

# Connect to the Aruba Switch
    Connect-ArubaSW 192.0.2.1

#we get a prompt for credential

if you get a warning about Unable to connect Look Issue

Vlans Management

You can create a new Vlan Add-ArubaSWVlans, retrieve its information Get-ArubaSWVlans, modify its properties Set-ArubaSWVLans, or delete it Remove-ArubaSWVlans.

# Create a vlan
    Add-ArubaSWVlans -id 85 -Name 'PowerArubaSW' -is_voice_enabled

    uri               : /vlans/85
    vlan_id           : 85
    name              : PowerArubaSW
    status            : VS_PORT_BASED
    type              : VT_STATIC
    is_voice_enabled  : True
    is_jumbo_enabled  : False
    is_dsnoop_enabled : False


# Get information about vlan
    Get-ArubaSWVlans -name PowerArubaSW | ft

    uri       vlan_id name         status        type      is_voice_enabled is_jumbo_enabled is_dsnoop_enabled is_management_vlan
    ---       ------- ----         ------        ----      ---------------- ---------------- ----------------- ------------------
    /vlans/85      85 PowerArubaSW VS_PORT_BASED VT_STATIC            True             False             False              False


# Remove a vlan
    Remove-ArubaSWVlans -id 85

Disconnecting

# Disconnect from the ArubaOS Switch
    Disconnect-ArubaSW

Issue

Unable to connect (certificate)

if you use Connect-ArubaSW and get Unable to Connect (certificate)

The issue coming from use Self-Signed or Expired Certificate for switch management Try to connect using Connect-ArubaSW -SkipCertificateCheck

Unable to connect

if you use Connect-ArubaSW and get Unable to Connect

Check if the HTTPS is enable on the switch

PowerArubaSW# show web-management

 Web Management - Server Configuration

  HTTP Access    : Enabled
  HTTPS Access   : Enabled
  SSL Port       : 443
  Idle Timeout   : 600 seconds
  Management URL : http://h17007.www1.hpe.com/device_help
  Support URL    : http://www.arubanetworks.com/products/networking/
  User Interface : Improved

if it is not enabled you can enable using

(config)# crypto pki enroll-self-signed certificate-name PowerArubaSW subject common-name PowerArubaSW country FR locality PowerArubaSW org PowerArubaSW org-unit PowerArubaSW
(config)# web-management ssl

You can use also Connect-ArubaSW -httpOnly for connect using HTTP (NOT RECOMMENDED !)

MultiConnection

From release 0.8.0, it is possible to connect on same times to multi switch You need to use -connection parameter to cmdlet

For example to get Vlan Ports of 2 switchs

# Connect to first switch
    $sw1 = Connect-ArubaSW 192.0.2.1 -SkipCertificateCheck -DefaultConnection:$false

#DefaultConnection set to false is not mandatory but only don't set the connection info on global variable

# Connect to second switch
    $sw2 = Connect-ArubaSW 192.0.2.1 -SkipCertificateCheck -DefaultConnection:$false

# Get Vlan Ports for first switch
    Get-ArubaSWVlanPorts -connection $sw1

    uri                  vlan_id port_id port_mode
    ---                  ------- ------- ---------
    /vlans-ports/1-1/1         1 1/1     POM_UNTAGGED
    /vlans-ports/23-1/2       23 1/2     POM_UNTAGGED
    /vlans-ports/1-1/3         1 1/3     POM_UNTAGGED
    /vlans-ports/23-1/3       23 1/3     POM_TAGGED_STATIC
....
# Get Vlan Ports for second switch
    Get-ArubaSWVlanPorts -connection $sw2

    uri                  vlan_id port_id port_mode
    ---                  ------- ------- ---------
    /vlans-ports/1-1/1         1 1/1     POM_UNTAGGED
    /vlans-ports/23-1/1       23 1/1     POM_TAGGED_STATIC
    /vlans-ports/1-1/2         1 1/2     POM_UNTAGGED
    /vlans-ports/23-1/3       23 1/3     POM_UNTAGGED
...

#Each cmdlet can use -connection parameter

List of available command

Add-ArubaSWLACP
Add-ArubaSWRadiusServer
Add-ArubaSWRadiusServerGroup
Add-ArubaSWTrunk
Add-ArubaSWVlans
Add-ArubaSWVlansPorts
Connect-ArubaSW
Disconnect-ArubaSW
Get-ArubaSWBanner
Get-ArubaSWCli
Get-ArubaSWCliBatchStatus
Get-ArubaSWDns
Get-ArubaSWIpAddress
Get-ArubaSWLACP
Get-ArubaSWLed
Get-ArubaSWLLDPGlobalStatus
Get-ArubaSWLLDPNeighborStats
Get-ArubaSWLLDPPortStats
Get-ArubaSWLLDPRemote
Get-ArubaSWMacTable
Get-ArubaSWModules
Get-ArubaSWPoE
Get-ArubaSWPoEStats
Get-ArubaSWPort
Get-ArubaSWPortStatistics
Get-ArubaSWRadiusProfile
Get-ArubaSWRadiusServer
Get-ArubaSWRadiusServerGroup
Get-ArubaSWRestSessionTimeout
Get-ArubaSWRestVersion
Get-ArubaSWSTP
Get-ArubaSWSTPPort
Get-ArubaSWSystem
Get-ArubaSWSystemStatus
Get-ArubaSWSystemStatusGlobal
Get-ArubaSWSystemStatusSwitch
Get-ArubaSWTrunk
Get-ArubaSWVlans
Get-ArubaSWVlansPorts
Invoke-ArubaSWWebRequest
Remove-ArubaSWDns
Remove-ArubaSWLACP
Remove-ArubaSWRadiusServer
Remove-ArubaSWRadiusServerGroup
Remove-ArubaSWTrunk
Remove-ArubaSWVlans
Remove-ArubaSWVlansPorts
Send-ArubaSWCliBatch
Set-ArubaSWBanner
Set-ArubaSWCipherSSL
Set-ArubaSWDns
Set-ArubaSWLed
Set-ArubaSWLLDPGlobalStatus
Set-ArubaSWPoE
Set-ArubaSWPort
Set-ArubaSWRadiusProfile
Set-ArubaSWRadiusServer
Set-ArubaSWRestSessionTimeout
Set-ArubaSWSTP
Set-ArubaSWSTPPort
Set-ArubaSWSystem
Set-ArubaSWuntrustedSSL
Set-ArubaSWVlans
Set-ArubaSWVlansPorts
Set-Cookie
Show-ArubaSWException
Test-ArubaSWPing

Author

Alexis La Goutte

• https://github.com/alagoutte
• https://twitter.com/alagoutte

Special Thanks

• Warren F. for his blog post 'Building a Powershell module'
• Erwan Quelin for help about Powershell

License

Copyright 2018-2021 Alexis La Goutte and the community.